Table of Contents
Advertisement
Tab
Control Level
Device
Condition Name
Diagnostics
Enable
Parameter Name
Parameter Description
Maintenance
Enable Block Offnet
tab
Diagnostic Alarm
(OFFNETALM_ENAB
LED)
Parameters for Link Configuration in Monitor Mode
The following table lists the Link configuration parameters that become active in the
Monitoring mode in addition to those listed above for the Project mode. We suggest that
you evaluate the impact of any parameter value change on Link operation before
changing another parameter.
Please note that not all parameters can be changed in the Monitoring mode. For example,
you cannot change any of the parameters on the Server Parameters tab in the Monitoring
mode.
R400
Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
Parameter
Default Value
200
Blank
TRUE
None
Honeywell
18. Appendix I
18.2. Description
Description
Indicate the Server Control
Level to be associated with this
function block.
This grid element displays all
the names of advanced alarm
conditions configured on the
selected device.
This grid element displays
current advanced alarm
condition status. Uncheck box
mean that the configured
condition is disabled. Check
mean that the condition is
enabled.
This grid element displays the
selected parameter name
(Transducer/Resource) of the
device, chosen for the no-
cache. This can be configurable
on project side.
This grid element displays the
selected parameter's
description.
This parameter is used for
enabling or disabling the Block
Offnet Diagnostic Alarm. By
default, this parameter is
disabled.
551
Advertisement
Table of Contents
