Honeywell Series A User Manual page 342

8. Maintenance, Checkout, and Calibration
8.7. Using Fieldbus Device Simulate Function
Step
16
Check that the AI.FF OUT.VALUE is 25.
17
Close pidloop control chart. Double-click
the AI.FF block icon.
18
On Maintenance tab, press <Tab> four
times.
342 Experion PKS Series A Fieldbus Interface Module User's Guide
Action
Honeywell
Result
Confirm that simulate value is active.
Calls up the Block Parameters form.
Moves cursor to Simulate En/Disable
field.
R400
July 2010