Honeywell Series A User Manual page 191

Step
21 Scroll the Parameters list box to
find PV. Click it.
Click Left/Right in Pin/Position box.
Click the Add button.
22
Click the OK button.
ATTENTION
For this example, we will accept the default values for the other parameters on the
Block Pins tab as well as the remaining tabs. These values are okay for the sample
loop. Please feel free to practice entering data in the other tabs, using the online Help
for support.
23
This completes the DATAACQ block
configuration. Go to the next procedure
Configuring PID block for sample loop.
Configuring PID block for sample loop
Step
1
In CM101 chart, double-click PIDA block.
R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
5.4. Configuring Fieldbus Components In a Control Strategy
Action
Action
Honeywell
Result
Adds PV as visible block output pin on
the right-hand side of the block.
Closes the Block Parameters form and
stores the configuration entries.
Result
Opens PID Block Parameters form with
Name field highlighted.
5. Configuration
191