Honeywell Series A User Manual page 333

Step
2 To change the tag name, key in
desired Tag (PD_TAG) name.
Usually use the tag name that
matches the one used for the Project
device. Use ST102 for this example.
Press <Enter> or click the OK
button.
To clear the tag name, just highlight
it and press <Delete>. Click the OK
button.
3
Click the Continue button.
4
Wait for change to complete. Press
<Tab>.
R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
8.6. Changing or Clearing Tag and/or Address of Uncommissioned Device
Action
Honeywell
8. Maintenance, Checkout, and Calibration
Result
Warning prompt asks for confirmation of
change.
Initiates change and opens progress
tracking dialog box to show status of the
change.
Moves cursor to the Address field.
333