If Methods Manager Dialog . . .
Includes list of available Methods.
ATTENTION
While using the Fieldbus Methods Manager to execute a method, do not use
Experion applications like Control Builder or Station to change the device/block
parameters for the device on which the methods is running.
While using the Fieldbus Methods Manager to execute a method, some methods
may display messages that are very specific to a vendor. In this case, please
consult the vendor's user/maintenance manual to verify/validate it.
R400
Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
8. Maintenance, Checkout, and Calibration
8.12. Using Fieldbus Methods Manager
Honeywell
Then, You Are Prompted
to . . .
Select the method to be
invoked and follow the
instructions in the Methods
Manager dialog.
361