Checking/Changing Fieldbus Device Functional Class - Honeywell Series A User Manual

REFERENCE - INTERNAL
Please refer to the Control Building Guide sections in On-Line Monitoring
Using Control Builder for detailed information:
Setting the CEE Inactive
Setting I/O Active
Setting I/O Inactive
Changing Parameters while Monitoring

Checking/changing fieldbus device functional class

TIP
If you are running R210 or greater software, an online wizard will be launched
when you try to change the functional class of a device. In this case, follow
the instructions in the wizard instead of the steps in the following procedure.
Use the following procedure to check and change, if necessary, the functional class of the
fieldbus device. The illustrations used are for example purposes only and may differ from
the actual forms that appear in your system.
Step
1
In Monitoring tab, double-click device
icon.
R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
6.3. Monitoring Fieldbus Functions Through Monitoring Tab
Action
Honeywell
Result
Opens device configuration Parameters
form.
6. Operation
257