Honeywell Series A User Manual page 190

5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
Step
19 Find PVLOALM.FL in the
Parameters list box. Click it.
Check that the Pin Position is
Output and Top/Bottom. Click the
Add button.
20
Click PV in Output - Bottom list box. Click
the Remove button.
190 Experion PKS Series A Fieldbus Interface Module User's Guide
Action
Honeywell
Result
Adds PVLOALM.FL as visible block
output pin.
Removes PV from list box.
R400
July 2010