Loading Boot Code - Honeywell Series A User Manual

Step
6
Check the boot version (BV) and
application (personality) version (AV)
listed on the face of the CIOM-A FIM
(FFIF01) module graphic. This
illustration is for example purposes only.
7
If firmware versions are correct (green),
click NetworkTools->Exit to close the
utility and quit this procedure.
If firmware versions are wrong (red), go
to the next procedure Loading Boot
code to continue.

Loading Boot code

This procedure assumes that you have launched Ntools and determined that the CIOM-A
FIM firmware needs to be updated.
Step
R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
Action
Action
Honeywell
16.1. Loading CIOM-A FIM firmware
Result
If the version numbers shown are colored
green, they are the correct ones for your
current system software version. If they
are colored red, they need to be updated.
Result
16. Appendix G
525