Table of Contents
Advertisement
5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
Step
ATTENTION
We recommend that you do not change the default value settings for the active
parameters on this form unless you are familiar with tuning the performance of fieldbus
links. The grayed out parameters are only accessible in the Monitoring tab with the
FIM/LINK communicating with the system.
Please refer to Link Parameters Reference in Appendix I for a more detailed
description of the user configurable LINK parameters in both the Project and Monitor
modes.
136
Experion PKS Series A Fieldbus Interface Module User's Guide
Action
Honeywell
Result
R400
July 2010
Advertisement
Table of Contents
