Table of Contents
Advertisement
6.3
Monitoring Fieldbus Functions Through Monitoring
Tab
Inactivating/Activating a Link
Use the following procedure to inactivate/activate a fieldbus Link through the Monitoring
tab in Control Builder.
ATTENTION
Inactivating a fieldbus Link essentially shuts downs the Link and the CIOM-A
FIM, if both Links are inactivated, and interrupts the transfer of data to the
Experion system. Be sure your system can tolerate the lost of live data, while
the link is inactive.
TIP
You can initiate this same function through the corresponding Detail display
in Station.
Step
1
In Monitoring tab, click LINK icon.
Click the Toggle State button
the toolbar.
R400
Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
6.3. Monitoring Fieldbus Functions Through Monitoring Tab
Action
in
Honeywell
Result
Opens Change State dialog box.
6. Operation
253
Advertisement
Table of Contents
