Honeywell Series A User Manual page 194

5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
Step
9
Key in >50<. Click the OK button.
10
This completes the PID block
configuration for the sample loop. Go to
the next procedure Configuring AO block
for sample loop.
Configuring AO block for sample loop
Step
1
In CM101 chart, double-click the AO
function block
194 Experion PKS Series A Fieldbus Interface Module User's Guide
Action
Action
Honeywell
Result
(Please see previous Attention note
about skipped parameters.)
Closes the Block Parameters form and
stores the configuration entries.
(Please see previous Attention note
about skipped parameters.)
Result
Opens the AO Block Parameters form
with Name field highlighted.
R400
July 2010