8. Maintenance, Checkout, and Calibration
8.11. Checking Fieldbus Device Calibration
8.11 Checking Fieldbus Device Calibration
Please refer to the manufacturer's documentation for the fieldbus device to determine the
recommended calibration schedules and procedures. The Tune and Other tabs on the
Parameters form for a device's transducer block provide pertinent calibration information,
when accessed through the Monitoring tab in Control Builder. The following illustrations
show typical Tune and Other tabs for reference.
Figure 34 Typical Tune tab for fieldbus device's Transducer block.
358
Experion PKS Series A Fieldbus Interface Module User's Guide
Honeywell
R400
July 2010