Table of Contents
Advertisement
If you want
to . . .
e)
Right-click device block and
Check
select Configure Module
instantiated
Parameters from shortcut menu.
block
configurati
f)
Click Block Instantiation tab.
on in
Project tab.
g)
Check Block Template Type
column for list of instantiated
blocks in device.
h)
Check Block Tag column to view
assigned tag to see if block is
used in a Control Module or not
as shown in the following
illustration.
R400
Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
3. Fieldbus Integration With Experion System
Then,
Honeywell
3.8. Block Instantiation Support
Notes and References
The Instantiation tab only
appears if the device
supports Block Instantiation.
See
Checking device
configuration
for reference
89
Advertisement
Table of Contents
