Foundation Fieldbus Detail Displays/Faceplates; Figure 27 Typical Fim Detail Display In Station - Honeywell Series A User Manual

6. Operation

6.2. Foundation Fieldbus Detail Displays/Faceplates

REFERENCE - INTERNAL
Please refer to the Operator's Guide for detailed information about calling up,
navigating, and viewing Station displays.
6.2 Foundation Fieldbus Detail Displays/Faceplates
With R311.2, a new set of Detail Displays and faceplates are created for the Foundation
Fieldbus control points. These displays provide clarity between the Fieldbus and CEE
controls. These displays are HMIWEB displays. The FF Detail Displays and faceplates
are designed to display only the standard FF parameters. The FF vendor-specific
parameters are not displayed.
This feature is applicable to the following Foundation Fieldbus control points.
PID (Proportional Integral Derivative)
244 Experion PKS Series A Fieldbus Interface Module User's Guide

Figure 27 Typical FIM Detail display in Station.

Honeywell
R400
July 2010