Checkingciom-A Fim Redundancy Status And Initiating Manual Switchover - Honeywell Series A User Manual

Fieldbus interface module

Hide thumbs Also See for Series A:

Table of Contents

This completes the procedure.

REFERENCE - INTERNAL

Please refer to Link Schedule and Function block execution schedule in this

document for additional schedule information.

CheckingCIOM-A FIM redundancy status and initiating manual switchover

You monitor redundant CIOM-A FIM status and initiate a manual switchover through

the Redundancy Module configuration form in Monitoring mode the same as you would

for a redundant Control Processor Module (CPM). The following illustration shows a

typical Summary tab for a Redundancy Module as viewed in Monitoring mode for

Experion PKS Series A Fieldbus Interface Module User's Guide

6.3. Monitoring Fieldbus Functions Through Monitoring Tab

6. Operation

Experion pks series a