Rout_In - Honeywell Series A User Manual

Fieldbus interface module

Hide thumbs Also See for Series A:

Table of Contents

ROUT_IN

Classification

FF Data Type

Experion PKS Series A Fieldbus Interface Module User's Guide

11.1. Standard Function Block Parameters

2: Restart Resource

3: Restart with Defaults

4: Restart Processor

Changing this parameter, may be fatal to communication.

Note that the Restart with Defaults function restarts the

fieldbus device with factory default values instead of

Experion ones. To restore Experion default values, re-load

the device block through Control Builder with associated

blocks set for Full instead of Partial Load.

Represents target output and status provided by a host to a

control block for use as the block's output in ROUT mode.

C/Remote-Output In

The data type consists of the value and status of floating

point parameters that are Inputs or Outputs. It uses the

following two elements.

11. Appendix B

Experion pks series a