Mounting On A Din Rail - Honeywell Series A User Manual

Fieldbus interface module

Hide thumbs Also See for Series A:

Table of Contents

4. Installation

4.3. Installing Fieldbus RTP TC-FFRU01/TC-FFRP02 or RRTP TC-FFSU01/TC-FFSP02

Figure 17 Redundant RTP model TC-FFSU01 is unpowered and can be

used in Division 2 hazardous locations; model TC-FFSP02 is powered and

can be used to power fieldbus devices in Intrinsically Safe applications.

Mounting on a DIN rail

You are responsible for obtaining and mounting the 35 x 7.5 mm metal,

top hat rails (DIN EN50022) to be used for mounting the Remote

Termination Panel (RTP).

We recommend that you mount the RTP in an enclosure.

Use the following procedure to mount the RTP on the user supplied DIN rail.

Orient the RTP so the top of the unit is over the top of the DIN rail.

Slightly rotate the RTP to slip its top mounting flange on the top of the DIN

Experion PKS Series A Fieldbus Interface Module User's Guide

J9 J10 J11 J12

Experion pks series a