Table of Contents
Advertisement
Step
3
Slide the module into the chassis until the module tabs "click" into position.
4
For redundant CIOM-A FIM applications, repeat Steps 1 to 3 to install
companion FIM in matching slots in the second chassis of the Redundant
Chassis Pair.
5
Go to the next procedure Connecting RTP cable to module.
Connecting RTP cable to module
Use the following procedure to connect the RTP cable to the CIOM-A FIM. This
procedure assumes that the CIOM-A FIM is installed in an unpowered chassis.
Step
1
Be sure the cable is long enough to reach the DIN rail mounted RTP.
R400
Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
4.2. Installing CIOM-A Fieldbus Interface Module TC-FFIF01
Action
Action
Honeywell
4. Installation
107
Advertisement
Table of Contents
