Matching Uncommissioned Device To Project Device Or Vice Versa - Honeywell Series A User Manual

Fieldbus interface module
Hide thumbs Also See for Series A:
Table of Contents

Advertisement

Step
5
Confirm that CIOM-A FIM icon now
appears in Monitoring tab. Click
sign for CIOM-A FIM icon.
6
This completes CIOM-A FIM load. Go to
the next section Matching
uncommissioned device to project device
or vice versa.

Matching uncommissioned device to project device or vice versa

TIP
If you are running R210 or greater software, the FIM will detect when an
uncommissioned (new) device is added to the link, prepare it for joining the
link, and define the device as an uncommissioned Basic device. In this case,
you can skip the following procedure.
Use the following procedure to initiate the device matching function to conveniently
match uncommissioned fieldbus devices with their counterpart devices in the Project tab
or project devices. It is best to match devices before you download the fieldbus device
from Project to the Link.
Step
1
If Link is inactive (blue icon), go to Step
2.
If Link is active (green icon), go to Step 6.
R400
Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
Action
plus
Action
Honeywell
5.5. Loading Components Online
Result
Opens directory and exposes LINK icons.
Result
Link must be active to detect
uncomminssioned devices on it.
5. Configuration
211

Advertisement

Table of Contents
loading

This manual is also suitable for:

Experion pks series a

Table of Contents