Honeywell Series A User Manual page 173

Associated Links named LINK10105 and LINK20105
Honeywell pressure transmitter named ST101 and assigned to LINK10105
Flowserve valve controller named LX102 and assigned to LINK10105
TIP
The following procedure is really intended for users who have never used
Control Builder before. If you have used Control Builder to build Experion
control strategies, you will find adding fieldbus function blocks is intuitive,
since it is the same as adding Experion function blocks.
Also, the procedures are abbreviated in some cases in the interest of brevity.
Once you get the "feel" of using Control Builder, it is more efficient to interact
directly with the application and use the online help to find an answer to a
question about a function or an entry.
Creating Control Module in Project
Step
1
In Library tab, click
System directory.
R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
5.4. Configuring Fieldbus Components In a Control Strategy
Action
plus sign for
Honeywell
Result
Opens System directory.
5. Configuration
173