Honeywell Series A User Manual page 129

Step
12
Click button to select slot number
where uplink ControlNet Module is
installed from dropdown list. Use slot 00
for this example. Press <Tab> twice.
(Remember that chassis slot numbering
is zero-based from left to right.)
13
Click check box to add check mark, if this
CIOM-A FIM is part of a Redundant
Chassis Pair. Leave check box blank, if
CIOM-A FIM is part of a non-redundant
chassis configuration. Press <Tab>.
14
Only valid when CIOM-A FIM is
redundant. Key in desired name for
secondary CIOM-A FIM or accept default
that is assigned name with SEC
appended. Press <Tab>.
15
Key in the name of the Entity that this
object will be associated with in the
Enterprise Model Builder hierarchy.
Press <Tab>.
R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
5.4. Configuring Fieldbus Components In a Control Strategy
Action
Honeywell
Result
Moves cursor to This controller is
redundant field.
If box is checked, default name for
seconday CIOM-A FIM appears in
Secondary Name field. Go to Next
Step.
If box is blank, moves cursor to
Item Name field. Go to Step 15.
See second bullet in row above.
Moves cursor to the FIM Command field.
5. Configuration
129