Table of Contents
Advertisement
8. Maintenance, Checkout, and Calibration
8.3. Replacing Device Template with a Different One
the CM is contained
You can export the data in any of the formats such as, MS Word, Excel, Adobe PDF,
and so on.
You can view the first level and second level modules that are affected due to the
device replacement.
You can print the data, which is available in the report generated.
To view Unlike Device Replacement Report, perform the following steps.
Step
1
Right-Click on the failed device icon to select Unlike Device Replacement
Report.
The report of the failed device that appears consists mainly of the directly
affected modules, general procedure for FF Unlike Device Replacement, and
the modules to be deleted.
2
In the Directly Affected Modules table, click Affected Module.
The detailed information about the selected Affected Module appears in a
Second Level Affected Modules tab.
3
In the Modules to be Deleted table, click Container Module Name.
The detailed information about the selected module name appears in a First
Level Affected Modules tab.
8.3
Replacing Device Template with a Different One
Use the following procedure to replace one or more instances of the same fieldbus device
type with a different device type.
Prerequisites
You have logged onto Control Builder with sufficient security level to make control
strategy changes.
You have created fieldbus device types.
320
Experion PKS Series A Fieldbus Interface Module User's Guide
ATTENTION
To view the Main Report, click Main Report tab.
Honeywell
Action
R400
July 2010
Advertisement
Table of Contents
