Honeywell Series A User Manual page 93

Fieldbus interface module

Hide thumbs Also See for Series A:

Table of Contents

Adding blocks to CM for sample

instantiated

for reference.

Load the configured device from

Project containing the desired number

instantiable

of function blocks as outlined in the

Experion PKS Series A Fieldbus Interface Module User's Guide

3. Fieldbus Integration With Experion System

3.8. Block Instantiation Support

Notes and References

You add instantiated blocks

to a Control Module the

same way you do fixed

blocks. They also are

configured in the same way

and have the same graphical

appearance as shown here.

Block instantiation in a

physical device only

occurs during a load.

Experion pks series a