Ddc Parameters - Honeywell Excel 50 User Manual

Hide thumbs Also See for Excel 50:

Table of Contents

EXCEL 50 MMI - USER GUIDE

Fig. 40. Hours run

An "hours run" log (i.e. a log of the number of hours for which e.g. a heating circuit

pump has been in operation) can be carried out for digital data-points (physical

and pseudo). The accumulated hours run are displayed in the "Hours Run"

attribute. The corresponding values have a resolution of 1 minute.

Move the cursor to the desired data-point and confirm.

The resultant screen (see Fig. 41) will then display the total running hours logged

together with the number of times the device has been switched on.

Fig. 41. Total running hours and no. of times switched on

DDC Parameters

Selecting "DDC Parameters" will cause a listbox with a corresponding heading

to appear (see Fig. 42).

Fig. 42. DDC parameters

EN2B-0222GE51 R0216

Table of Contents

Show Quick Links

Table of Contents