Base Module; Service Clearances And Dimensions (Side View); Base Module Measurements - Oracle StorageTek SL3000 System Assurance Manual

Figure 7–2 Service Clearances and Dimensions (Side View)
Figure Legend:
Base and DEM rear service clearance
1.
Base and DEM front service clearance
2.
AEM service clearance
3.
Jack pad adjustment range
4.

Base Module

Table 7–1
Dimension Type
Height
Width
Depth
Service Area
Weight
1
Minimum transportation clearance. There are alignment tabs on each side of the module, which add 4.5
cm to the 76.8 cm width of the module. Therefore, 81.3 cm is the minimum transportation width.
2
One side cover adds 7.4 cm (2.9 in.) to the module width. Only the ends of the library require side covers.

Base Module Measurements

Measurement
196.7 cm (77.45 in.) on casters for transport
197.5 cm (77.75 in.) to 201.68 cm (79.4 in.) on jack pads for permanent install
76.8 cm (30.22 in.) when placed between modules
81.3 cm (32 in.) transport width (no side covers)
91.5 cm (36 in.) standalone with side covers on both sides
121.9 cm (48 in.)
Front: 45.7 cm (18.0 in.)
Rear: 81.3 cm (32.0 in.)
Side Cooling Area: 5 cm (2 in.)
Side Install Area: 45.7 cm (18.0 in.)
Frame only: 361 kg (796 lb), Shipping weight: 411 kg (905 lb)
8 drives and media: 623 kg (1372 lb)
16 drives and media: 661 kg (1457 lb)
24 drives and media: 687 kg (1514 lb)
Side Covers: 18.5 kg (41 lb) per side
Physical Dimensions and Weights
1
2
Site Planning 7-3