To Connect The Hba To Internal Storage Devices - Oracle 7116970 Installation Manual

To Connect the HBA to Internal Storage Devices

4. Press down gently and firmly to seat the HBA in the PCIe slot, and then secure
the bracket to the system chassis with the retention clip (see the following
figure).
Note -
To Connect the HBA to Internal Storage Devices
1. Install and configure the SAS devices in the system.
For more information, see the documentation for the devices.
2. Connect the SFF-8643 x4 Mini SAS HD connector on one end of the SAS cable to
an internal port.
Use only Oracle-provided SAS cables (provided with your Oracle system at time of purchase).
16 Oracle Storage 12 Gb SAS PCIe RAID HBA, Internal: 16 Port and 2 GB Memory Installation Guide For HBA Model
7116970 • September 2017
The configuration of the enclosure might not be the same as shown in this illustration.