Turn Signals - Buell Ulysses 2006 Service Manual

HOME

TURN SIGNALS

REMOVAL
NOTE
To ensure correct installation, make note of wire routing and
cable strap locations before removing turn signals.
Bulbs
Remove screw on back of housing to access turn signal
bulbs.
Front
1. Remove windshield and windscreen. See
SHIELD AND WINDSCREEN.
2. See Figure 7-53. Disconnect bullet connectors on turn
signal wires.
3. See Figure 7-54. Remove jam nut and lockwasher (2)
from inside of front module (3).
4. Pull bullet connectors and wiring through hole in front
module (3) and remove turn signal (1).
b1100x7x
Left Turn
Signal
Right Turn
Signal
2.44 WIND-
Figure 7-53. Front Turn Signal Connections
V
BE
1 1
BK
BK
2 2
[31B]
[31A]
BK BK
2 2
BE BN
1 1
[31B]
[31A]
2006 Buell Ulysses: Electrical
7.15
7-49