Buell Ulysses 2006 Service Manual page 338

HOME
b1016x3x
7. See Figure 3-156. Assemble crankcase halves together.
a. Apply a thin coat of GREY HIGH-PERFORMANCE
SEALANT (Part No. 99650-02) to crankcase joint
faces.
b. Slide outer race in right crankcase over pinion shaft
and bearing assembly.
c. Apply LOCTITE 272 to the last few threads and
tighten fasteners to 15-19 ft-lbs (20-26 Nm).
NOTE
According to manufacturing, there is no torque sequence to
follow when tightening crankcase fasteners.
3-104 2006 Buell Ulysses: Engine
D
Indicates Bolt Pattern Location
Figure 3-156. Crankcase Fasteners
One Behind Shifter Mechanism