Buell Ulysses 2006 Service Manual page 499

HOME
SPECIFICATIONS
NOTE
Service wear limits are given as a guideline for measuring
components that are not new. For measurement specifica-
tions not given under SERVICE WEAR LIMITS, see NEW
COMPONENTS.
Engine sprocket – number of teeth
Clutch sprocket – number of teeth
Table 6-2. Final Drive (Transmission-to-rear Wheel)
Transmission sprocket – number of teeth
Rear wheel sprocket – number of teeth
Secondary drive belt – number of teeth
Primary drive / transmission lubricant capacity (approximately)
First gear (low)
Second gear
Third gear
Fourth gear
Fifth gear (high)
Table 6-4. Wet Clutch Multiple Disc-clutch Plate Thickness
ITEM
Friction plate (fiber) (in.)
Steel plate
Clutch pack (in.)
Table 6-1. Primary Drive (Engine-to-transmission)
ITEM
ITEM
Table 6-3. Transmission
ITEM
Overall gear ratios
NEW COMPONENTS
0.0866 + 0.0031 in. (2.200 + 0.079 mm)
0.0629 + 0.0020 in. (1.598 + 0.051 mm)
N/A
NEW COMPONENTS (1200)
38
57
NEW COMPONENTS SERVICE WEAR LIMITS
27
65
135
NEW COMPONENTS (1200)
Approximately 32 fl. oz. (946 ml)
9.563
6.831
5.080
4.211
3.611
SERVICE WEAR LIMITS
0.661 in. (16.789 mm) (minimum)
2006 Buell Ulysses: Drive/Transmission
6.1
Inspect at 5,000 mi
(8,000 km)
Inspect at 5,000 mi
(8,000 km)
Inspect at 5,000 mi
(8,000 km)
N/A
N/A
6-1