Buell Ulysses 2006 Service Manual page 194

HOME
13. See Figure 2-102. Remove clutch inspection cover (2).
14. Remove complete shift assembly.
a. Remove flange bolt (6) from primary cover.
b. Remove engine shift lever assembly (3). Do not
scratch primary cover.
15. See Figure 2-103. Remove the outer ramp and hook (1)
from the cable end (3) and coupling (2). Remove cable
b1194x2x
1
8
1. Primary cover
2. Clutch inspection cover
3. Engine shift lever
4. Shift pedal assembly
8413
3
1. Outer ramp and hook
2. Coupling
3. Cable end
Figure 2-103. Clutch Release Mechanism (Typical)
2-70 2006 Buell Ulysses: Chassis
16. See
17. Remove and discard oring on the clutch cable fitting.
2
5.
6.
7.
8.
Figure 2-102. Shifter Linkage
1
2
end from slot in coupling. See 6.3 CLUTCH RELEASE
MECHANISM.
Figure 2-104. Unscrew the cable fitting from the pri-
mary cover. Remove clutch cable and fitting.
5
4
3
7
Shift linkage assembly
Flange head bolt
Shifter bracket
Drain plug
11168
Figure 2-104. Clutch Cable and Fitting
6