Buell Ulysses 2006 Service Manual page 171

HOME
Figure 2-70. Fork Spring Compressing Tool (HD-45966)
6. See Figure 2-70. Move the fork assembly from the hold-
ing tool and compress fork in the FORK SPRING COM-
PRESSION TOOL.
NOTES
FORK SPRING COMPRESSING TOOL (HD-45966)
comes with a cup and screw that are for FLT models only
and not to be used with Buell.
When using the FORK SPRING COMPRESSING TOOL
be sure not to bind the outer fork tube on the tool.
b1145x1x
8479
1. Fork cap
2. Preload pins
3. Damper rod assembly
4. Preload washer
5. Slider piston
Figure 2-71. Holding Damper Rod Assembly
7. See Figure 2-71.
remove fork cap (1).
Careful not to damage preload pins while holding damper rod
assembly.
8. Remove preload washer (4) and slider piston (5).
9. See Figure 2-70.
SPRING COMPRESSION TOOL.
1
2
3
4
5
Hold damper rod assembly (3) and
NOTE
Expand fork and remove from FORK
2006 Buell Ulysses: Chassis 2-47