Buell Ulysses 2006 Service Manual page 635

HOME
11. See Figure 7-98. Position the cam position sensor wire
bundle and the voltage regulator wire bundle inboard,
then push the wire bundle up against the return oil line
and cable strap them to the return oil line.
12. See Figure 7-99. Capture the main wire harness bundle,
the vehicle speed sensor lead, the stator bundle, and the
muffler actuator cable (if applicable) to the oil return line
with a cable strap.
13. See Figure 7-100. Connect the vehicle speed sensor
last.
NOTES
The vehicle speed sensor is positioned high in the bun-
dle in order for the front sprocket cover to conform to the
additional components.
See Figure 7-101. Make sure main harness (2) is routed
around sprocket cover boss (1).
14. Install sprocket cover. See
12007
Figure 7-98. Cable Strap Wire Bundle to Return Oil Line
12014
Figure 7-99. Cable Strap Wire Bundle to Return Oil Line,
Upper Part of Sprocket Cover
2.35 SPROCKET COVER.
12015
Figure 7-100. Vehicle Speed Sensor
11970a
2
1
1. Sprocket cover boss
2. Main harness
3. Cable strap securing main harness wiring
Figure 7-101. Correct Location for Sprocket Cover Wiring
2006 Buell Ulysses: Electrical
3
7-81