Buell Ulysses 2006 Service Manual page 336

HOME
ASSEMBLY
Crankcase Halves
NOTE
Lubricate all parts with Harley-Davidson 20W50 engine oil,
and proceed as follows:
1. See Figure 3-153. Using CRANKCASE BEARING
REMOVER/INSTALLER (Part No. B-45655, HD-42720-2
and HD-46663), install sprocket shaft bearing into left
crankcase half from the inside.
b1046a3x
5
6
7
1. Spacer, sprocket shaft
2. Retaining ring, oil seal
3. Oil seal
4. Thrust washer
5. Crankcase half
6. Bearing
7. Bearing retaining ring
3-102 2006 Buell Ulysses: Engine
Make sure that the bearing assembly bottoms against the
machined shoulder in the left crankcase half.
2.
3.
Figure 3-152. Sprocket Shaft Bearing Assembly
NOTE
Install new bearing retaining ring in left crankcase half.
Install transmission. See 6.14 TRANSMISSION INSTAL-
LATION.
2
3
4
1