Buell Ulysses 2006 Service Manual page 625

HOME
11930
1. Turn signal flasher connector [30]
2. Instrument cluster connector [39]
3. Right handlebar connector [22]
4. Left handlebar connector [24]
5. Turn signal connectors [31]
6. Ignition switch
15. Remove windshield and windscreen. See
SHIELD AND WINDSCREEN.
16. See Figure 7-84. Disconnect:
Ignition switch [33].
Auxiliary power outlet [160].
Turn signal flasher connector [30].
Instrument module connector [39].
Left switch housing connector [24] and right switch
housing connector [22].
Turn signal connectors [31].
Headlight connector [38].
Horn connectors [122].
Clutch switch [95] from left switch housing.
Front brake switch [121] from right switch housing.
Interactive exhaust actuator [161].
O2 sensor [137].
Temp sensor [90]
Fuel injectors [84] & [85].
Ground fastener at steering head.
17. Disconnect intake air temperature sensor [89]. See
INTAKE AIR TEMPERATURE
18. Disconnect throttle position sensor [88]. See
THROTTLE POSITION
3
5
12
Figure 7-84. Electrical Connectors Behind Windscreen
2.44 WIND-
SENSOR.
SENSOR.
2
4
6
9
11
7. Cable strap
8. Main harness
9. Horn fastener
10. Horn mount
11. Horn connector [122]
12. Horn
19. Disconnect and remove ignition coil. See
COIL.
20. Cut and remove cable strap (7) securing main harness to
ignition switch.
21. Remove cable and main harness guide from steering
head.
22. Disconnect wiring located under sprocket cover. See
7.26 SPROCKET COVER
23. Disconnect starter solenoid [128].
24. Remove connector from oil pressure switch [120]. Oil
pressure switch is located on front of engine. See
OIL PRESSURE INDICATOR
25. Disconnect fuel line at fuel rail.
26. Disconnect fuel pump connector [86].
4.36
4.37
1
5
7
8
10
4.32 IGNITION
WIRING.
SWITCH.
2006 Buell Ulysses: Electrical
3.12
7-71