No Ecm Power - Buell Ulysses 2006 Service Manual

HOME

NO ECM POWER

GENERAL
A relay controlled by the engine stop switch supplies power to
the ECM. The relay requires a ground to operate. If the
ground is not established, the ECM will not receive power. If
the ECM does not appear to be receiving power, check the
ground sources. A blown ignition fuse or ECM fuse can also
disable the ECM.
DIAGNOSTICS
Diagnostic Notes
The reference numbers below correlate with the circled num-
bers on the Test 4.12 flow chart.
1. Connect BREAKOUT BOX (Part No. HD-42682) to ECM.
See 4.6 BREAKOUT BOX.
2006 Buell Ulysses: Fuel System
4.12
4-29