Buell Ulysses 2006 Service Manual page 327

HOME
b1016x3x
PISTON JETS
Removal
b1113x3x
Figure 3-137. Piston Oil Jet Assemblies
1. See Figure 3-137. Remove two TORX screws from each
piston jet assembly to free piston jets from right crank-
case.
2. Remove piston jet gaskets from right crankcase.
D
Indicates Bolt Pattern Location
Figure 3-136. Crankcase Fasteners
One Behind Shifter Mechanism
Installation
NOTES
Gaskets that are missing, distorted, pinched or otherwise
damaged will result in either oil leakage or low oil pres-
sure.
Gasket is part of the piston jet assembly. Gasket not sold
separately.
1. Install new piston oil jet assemblies in right crankcase.
2. Apply LOCTITE 222 (purple) to threads of TORX screws.
3. With the jet pointed upward, install TORX screws to
secure piston jet to crankcase. Tighten screws to 25-35
in-lbs (2.8-4.0 Nm).
2006 Buell Ulysses: Engine 3-93