Rider And Passenger Footpegs - Buell Ulysses 2006 Service Manual

HOME

RIDER AND PASSENGER FOOTPEGS

RIDER
Remove Footpeg
1. See Figure 2-117. Remove clip (3).
2. Remove footpeg pin (8).
3. Remove footpeg (10) and spring (9).
Install Footpeg
1. See Figure 2-117. Fit spring ends to footpeg mount and
footpeg.
2. Hold footpeg (10), controlling spring, to footpeg mount
(1).
3. Install footpeg pin (8) through mount, spring and footpeg.
4. Install clip (3)
b0934a2x
4
1. Footpeg mount
2. Footpeg mount fasteners (3)
3. Clip, footpeg
4. Passenger footpeg
5. Detent plate
6. Ball
7. Spring
8. Pin
9. Spring
10. Rider footpeg
8
5
7
6
3
10
Figure 2-117. Rider Footpeg, Mount and Heel Guard Assembly
PASSENGER
Remove Footpeg
1. Remove clip (3).
2. Remove footpeg pin (8).
3. Remove footpeg (4), detent plate (5), ball (6) and
spring (7).
Install Footpeg
1. Position footpeg (4), detent plate (5), ball (6), and spring
(7) on to footpeg mount (1).
2. Install footpeg pin (8).
3. Install clip (3).
4. Check that footpeg clicks in the up and down position.
1
2
9
8
3
2006 Buell Ulysses: Chassis
2.33
2-85