HOME
19. Support engine with wide scissors jack.
20. Unbolt "V" bracket from main frame.
21. Remove center tie bar from engine.
8735
1
1.
Rear isolator bolt
2.
Rear tie bar
Figure 3-6. Rear Isolator Bolt and Rear Tie Bar (Typical)
22. See
Figure 3-6.
Remove rear tie bar from frame only.
23. Loosen rear isolator bolt. DO NOT REMOVE.
2
10502
2
1.
Front isolator bolt
2.
Front isolator mount
3.
Front tie bar
Figure 3-7. Front Isolator and Tie Bar Assemblies
24. See
Figure 3-7.
Remove front isolator bolt (1).
25. Remove front isolator mount (2) from engine.
26. Rotate engine down.
2006 Buell Ulysses: Engine
1
3
3-13