Buell Ulysses 2006 Service Manual page 114

HOME
ADJUST TIMING
1. See Figure 1-53. Remove timing plate cover.
a. Drill rivets holding the timing plate cover.
b. Using a hook, remove timing plate cover.
c. Loosen sensor assembly fasteners.
2. See Figure 1-55. If timing is advanced (mark appears on
left side of window) rotate timing plate counterclockwise.
3. Check timing. See CHECKING STATIC
4. See Figure 1-56. If timing is retarded (mark appears on
right side of window) rotate timing plate clockwise.
5. Tighten sensor assembly fasteners to 15-30 in-lbs (1.7-
3.4 Nm).
6. Recheck timing.
12136
Figure 1-53. Timer Cover
8391
Figure 1-54. Cam Position Sensor
1-46 2006 Buell Uylsses: Maintenance
b1247x1x
TIMING.
b1248x1x
Figure 1-55. Advanced Timing
Figure 1-56. Retard Timing