Buell Ulysses 2006 Service Manual page 451

HOME
REPAIR
Fuel Pressure Regulator Replacement
1. Remove fuel pump assembly from tank. See REMOVAL
in this section.
2. See Figure 4-87. Remove the plastic retaining ring (1)
securing the four plastic retainers (2) holding the fuel
pressure regulator (3) in place. Spread the four clips and
detach regulator (3) from regulator housing (4).
10937a
1. Plastic retaining ring
2. Plastic retainers
2
1
Figure 4-87. Fuel Pressure Regulator
3. Remove and discard o-rings from regulator.
4. Install new o-rings on new regulator. Press new regula-
tor into place.
5. Install plastic retaining ring (1).
6. Install fuel pump assembly. See INSTALLATION in this
section.
4
3
3. Fuel pressure regulator
4. Fuel pressure regulator housing
2006 Buell Ulysses: Fuel System 4-109