Buell Ulysses 2006 Service Manual page 332

HOME
Selection
See Table 3-31. Select bearings using the identification infor-
mation given for inner and outer races.
FAC-
TORY
STAMP
OUTER RACE ID
ED
NUM-
BER
over 1.5672 in.
39.807 mm
1.5670-1.5672 in.
39.802-39.807 mm
1.5668-1.5670 in.
39.797-39.802 mm
1.5666-1.5668 in.
39.792-39.797 mm
1.5664-1.5666 in.
39.787-39.792 mm
1.5662-1.5664 in.
39.781-39-787 mm
1.5660-1.5662 in.
39.776-39.781 mm
1.5658-1.5660 in.
39.771-39.776 mm
1.5656-1.5658 in.
39.766-39.771 mm
1.5654-1.5656 in.
39.761-39.766 mm
1.5652-1.5654 in.
39.756-39.761 mm
3 1.5650-1.5652 in.
39.751-39.756 mm
2 1.5648-1.5650 in.
39.746-39.751 mm
1 1.5646-1.5648 in.
39.741-39.746 mm
INNER
RACE OD (In)
FACTORY COLOR CODE
3-98 2006 Buell Ulysses: Engine
Table 3-31. Pinion Shaft Bearing Selection
BEARING SIZE AS IDENTIFIED BY COLOR CODING
Service Wear Limit Exceeded – Replace Outer Race and Resize
Red
Red Blue
Red Blue White-
Gray
Blue White- Green
Gray
White- Green
Gray
1.2496- 1.2498- 1.2500
1.2498 1.2500 -
in. in. 1.2502
in.
31.740 31.745 31.750
31.745 31.750 -
mm mm 31.755
mm
Green White
Red
Red Blue
Red Blue White-
Gray
Red Blue White- Green
Gray
Blue White- Green
Gray
White- Green
Gray
Green
1.2502 1.2504- 1.2506 1.2508
- 1.2506 - -
1.2504 in. 1.2508 1.2510
in. in. in.
31.755 31.760- 31.765 31.770
- 31.765 - -
31.760 mm 31.770 31.755
mm mm mm
Red
Red Blue
Red Blue White-
Gray
Red Blue White- Green
Gray
Blue White- Green
Gray
White- Green
Gray
Green
1.2510 1.2512 1.2514 1.2516
- - - -
1.2512 1.2514 1.2516 1.2518
in. in. in. in.
31.775 31.780 31.786 3.791-
- - - 31.796
31.780 31.786 31.791 mm
mm mm mm