Mazda RX-8 Workshop Manual page 4108

< Previous Next >
2011 - RX-8 - Body and Accessories
INSTRUMENT CLUSTER INSPECTION
Speedometer
Using the input/output check mode
1. Inspect the speedometer by setting it to check code 12 of the input/output check mode. (See
INSTRUMENT CLUSTER INPUT/OUTPUT CHECK
Using a speedometer tester
1. Adjust the tire pressure to the specification.
2. Using a speedometer tester, verify that the tester reading is as indicated in the table below.
Speedometer tester indication (km/h)Allowable range (km/h)
20
40
60
80
100
120
140
MODE.)
19—21
39—41
59—61
79—81
99—101
119—121
139—141