Wireless Zero Config Utility And The Summit Radio - LXE MX7 Tecton CE Reference Manual

Wireless Zero Config Utility and the Summit Radio

Wireless Zero Config Utility and the Summit Radio
The WZC utility has an icon in the toolbar that looks like networked computers with a red X through them, indicating that
l
Wireless Zero Config application is enabled but the connection is inactive at this time (the device is not connected to a
network). The WZC icon may not be visible until control is passed to the WZC utility as described below.
You can use either the Wireless Zero Configuration Utility or the Summit Client Utility to connect to your network. LXE
l
recommends using the Summit Client Utility to connect to your network. The Wireless Zero Configuration Utility cannot
control the complete set of security features of the radio.
How To: Use the Wireless Zero Config Utility
1. Select ThirdPartyConfig in the Active Profile drop down list as the active profile (see
2. Warmboot the device.
The Summit Client Utility passes control to Wireless Zero Config and the WZC Wireless Information control panel. Using the
options in the Wireless Zero Config panels, setup radio and security settings.
How to: Switch Control to SCU
1. To switch back to SCU control, select any other profile in the SCU Active Config drop down list, except Third-
PartyConfig.
2. Warmboot the device.
Radio control is passed to the SCU.
E-EQ-MX7CERG-A [ 242 ] MX7 Tecton™ CE Reference Guide
Main Tab).