Summit Client; Certs; Wireless Zero Config Utility And The Summit Client - LXE MX7 Reference Manual

Microsoft windows ce 5.0 equipped
Hide thumbs Also See for MX7:
Table of Contents

Advertisement

88

Summit Client

Access:
Summit automatically installs and runs after every cold and warm boot.
Disable Summit
Tap the Disable Radio button. The wireless device is enabled by default after every cold reset.
Enable Summit
When the wireless device is disabled, tap the Enable Radio button. The wireless device is
enabled by default after every cold reset.
See Chapter 5 "Wireless Network Configuration" for Summit Client Utility setup information and
instruction.

Certs

Access:
Contents of README.TXT file are located in Start | Programs | Summit | Certs menu option:
CA Certificate files, user certificate files and PAC files are accessed only from this
location. When entering the certificate filenames in the Summit Client Utility (SCU),
only the filename and extension are entered. Only PEM, DER and PFX extensions are
allowed for certificate files.
See Chapter 5 "Wireless Network Configuration" for directions for acquiring CA and user
certificate files.

Wireless Zero Config Utility and the Summit Client

This utility has an icon in the toolbar that looks like networked computers with a red X through
them, indicating the application is enabled and the MX7 is not connected to a network.
If you will be using the Wireless Zero Config Utility to configure the network card, or connect to
a network, perform the following steps:
1. Tap the Summit Client Utility icon on the desktop, or tap Start | Programs | Summit |
2. Select ThirdPartyConfig in the Active Config drop down box.
3. A message appears that a Power Cycle is required to make settings activate properly. Tap
4. Tap the Power button to place the MX7 in Suspend, then tap the Power button to wake
The Wireless Zero Config utility begins.
MX7 Reference Guide
| Programs | Summit
Start | Programs | Summit | SCU
Start | Programs | Summit | SCU | Enable Radio
| Programs | Summit | Certs
SCU.
OK to close the message window.
the MX7 from Suspend mode.
Start Menu Program Options
E-EQ-MX7RG-L-ARC

Advertisement

Table of Contents
loading

Table of Contents