SERVICE MANUAL
7.2.4
Replacing the complete rear light (LED lighting unit)
Requirements:
4 mm Allen key
13 mm socket spanner
Removing the rear light
Remove the rear and the centre cover as described in chapters 7.1.1 and 7.1.2.
Carefully note the location of the cable and the connection locations of the various plugs.
Either mark each plug and socket, or take a photograph with a digital camera.
Loosen the cable leading to the lighting PCB from the rear light affected (2).
Loosen the nut (1) with a 13 mm socket spanner.
Lift off the plastic casing (2).
42
®
4
Invacare
- STORM
MAX