Replacing The Complete Rear Light (Conventional Lighting Unit) - Invacare Storm4 Service Manual

®
Invacare - STORM

8.7.12 Replacing the complete rear light (conventional lighting unit)

Requirements:
· 4 mm Allen key
· 8 mm socket spanner
· 13 mm socket spanner
Removing the rear light
·
Remove the rear and the centre cover as described in chapters 8.1.1 and 8.1.2.
·
Carefully note the location of the cable and the connection locations of the various plugs. Either
mark each plug and socket, or take a photograph with a digital camera.
·
Loosen the cable leading to the lighting PCB from the rear light affected (2).
·
Loosen the nut (1) with a 13 mm socket spanner.
·
Lift the plastic casing off carefully (2).
4
SERVICE MANUAL
85