Attaching An Acl On A Wlan Interface/Port - Motorola RFS Series System Reference Manual

6.4.2 Attaching an ACL on a WLAN Interface/Port

Use the Attach-WLAN
attached, create a ACL entry to allow arp with least precedence.
NOTE: WLAN based ACLs allows users to enforce rules/ACLs on both the inbound and
outbound direction, as opposed to Layer 2 ACLs, which just support the inbound direction.
The ACL rules per AAP is <0-24>
To configure a WLAN ACL:
1. Select Security
2. Click the Security Policy
3. Click the Attach-WLAN
4. Refer to the following information as displayed within the
WLAN Index
IP ACL
MAC ACL
Direction
5. Select a WLAN (by row) and click Edit to modify the WLAN Index, IP ACL and MAC ACL values.
6. Select a row and click the
switch).
7. Click the Add button to add an ACL to a WLAN interface. For more information, see
New ACL WLAN Configuration on page
tab to view and assign an ACL to a WLAN on the switch. If a MAC ACL is being
> Wireless Firewall from the main menu tree.
tab.
tab.
Displays the list of WLANs attached with ACLs.
Displays the IP ACL configured.
Displays the MAC ACL configured.
Displays whether the WLAN ACL is configured to work in an inbound or outbound
direction.
Delete button to delete the ACL from the list available (but not from the
6-20.
Attach-WLAN tab:
Adding or Editing a
6-19
Switch Security