Configuring Wireless Filters - Motorola RFS Series System Reference Manual

6-28 Motorola RF Switch System Reference Guide
5. Select an interface and click on
information
6.4.6.1 Editing an Adaptive AP LAN
To Edit an AAP LANs page:
1. Select Security
2. Click on the
3. Click on the
4. On the Attach AAP WLAN
AP MAC Address
LAN Index
ACL ID: Inbound
ACL ID: Outbound
5. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
6. Click OK to use the changes to the running configuration and close the dialog.
7. Click Cancel

6.4.7 Configuring Wireless Filters

Use filters to either allow or deny a MAC address (or groups of MAC addresses) from associating with the
switch. Refer to the
be selected from those available and edited or deleted. Additionally, a new filter can be added if an existing
filter does not adequately express the MU's address range required.
To display the Wireless Filters main page:
1. Select Security
2. Click on the
3. Click on the
Edit to modify the LAN Index, IP ACL and MAC ACL values. For more
see,Editing an Adaptive AP LAN on page
> Wireless Firewall
Security Policy tab.
Wireless Filters tab.
tab select a WLAN and click the
Displays the MAC Address of the selected Adaptive AP. This value cannot be
modified.
The LAN Index displays the list of attached Adaptive AP LANs with ACLs.
Edit the Inbound ACL ID for the selected Adaptive AP.
Edit the Outbound ACL ID for the selected Adaptive AP.
Status field for the state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
Wireless Filters screen to review the properties of existing switch filters. A filter can
> Wireless Firewall
Security Policy tab.
Wireless Filters tab.
6-28.
from the main menu tree.
Edit
from the main menu tree.
button: