Table of Contents
Advertisement
6. Use the M3.5 screws to secure the rear brackets to the front brackets. Torque
7. Connect all the cables.
8. Initialize the switch, see Chapter 4, "Initializing the RackSwitch," on page 43.
Installing the 1U air duct option in a rack
The RackSwitch supports an optional 1U air duct to maximize air flow conditions in
a 19" rack. For 1U air duct option part numbers, see the Chapter 6, "Replaceable
switch parts," on page 49 section.
Mounting kit components
The 1U air duct option ships with:
v One 1U air duct unit
v One 1U air duct mechanical assembly mounting kit
v One power cord
8
the screws to approximately 1.1 Nm +/- 0.1 Nm (10 inch-pounds).
10 11
Attention:
If this is a switch replacement, make sure the VPD is updated to
avoid losing the licensed electronic entitlement data of the RackSwitch. For
more information, see "Configuring Vital Product Data after a switch
replacement" on page 40.
4
2
9
3
Chapter 2. Installing the RackSwitch and options
6
25
Advertisement
Table of Contents
