Connecting The Rj-45 Ethernet Cable - IBM Flex System EN4023 User Manual

2
Cabling the switch

Connecting the RJ-45 Ethernet cable

The RJ-45 Ethernet cable can be connected to the RJ-45 port located on the front panel.
To connect the RJ-45 connector to the switch, push the connector into the port connector until it
clicks into place, as shown in Figure 8.
FIGURE 8
RJ-45 Ethernet connection
To disconnect the RJ-45 Ethernet cable, grasp the connector and gently pull the cable from the
switch.
18 IBM Flex System EN4023 10Gb Scalable Switch User's Guide